# Hardware **URL:** https://forum.farmbot.org/c/hardware/5.md [Latest](https://forum.farmbot.org/latest.md) · [Categories](https://forum.farmbot.org/categories.md) --- ## [Share photos of your build!](https://forum.farmbot.org/t/share-photos-of-your-build/1730)
**Author:** [@roryaronson](https://forum.farmbot.org/u/roryaronson)\ **Replies:** 80\ **Last updated:** [April 25, 2024, 6:19pm UTC](https://forum.farmbot.org/t/share-photos-of-your-build/1730 "2024-04-25T18:19:19Z")
Hi FarmBot community, I think it would be great for us to share photos of our builds so that we can all get inspired by each other's installations and maybe even learn a thing or two about how best to setup our FarmBot… --- ## [Selling FarmBot Genesis v1.5 in Switzerland](https://forum.farmbot.org/t/selling-farmbot-genesis-v1-5-in-switzerland/10248)
**Author:** [@francois](https://forum.farmbot.org/u/francois)\ **Replies:** 4\ **Last updated:** [October 12, 2026, 12:27pm UTC](https://forum.farmbot.org/t/selling-farmbot-genesis-v1-5-in-switzerland/10248 "2026-10-12T12:27:35Z")
Selling FarmBot Genesis v1.5, width 1300 mm, length 4700 mm. Location: Bern, Switzerland. --- ## [Servo pwm relay for external irrigation system](https://forum.farmbot.org/t/servo-pwm-relay-for-external-irrigation-system/10092)
**Author:** [@jturbett](https://forum.farmbot.org/u/jturbett)\ **Replies:** 0\ **Last updated:** [May 27, 2026, 4:43pm UTC](https://forum.farmbot.org/t/servo-pwm-relay-for-external-irrigation-system/10092 "2026-05-27T16:43:56Z")
All, I am debating to solution an multi valve 24 v irrigation control, using a servo pwn relay and the auxiliary servo capabilities( I once had a spinning propeller on the servo to scare the birds when motion was detect… --- ## [Vacuum pump PCB files?](https://forum.farmbot.org/t/vacuum-pump-pcb-files/9959)
**Author:** [@shaische](https://forum.farmbot.org/u/shaische)\ **Replies:** 0\ **Last updated:** [November 9, 2025, 8:50am UTC](https://forum.farmbot.org/t/vacuum-pump-pcb-files/9959 "2025-11-09T08:50:24Z")
Hi, I’ve searched and couldn’t find the open source files for the vacuum pump PCB sold here: 24v Vacuum Pump with EMI Filter — FarmBot Is it available anywhere? --- ## [Separate water nozzle (no need to Mount) / Improved water flow](https://forum.farmbot.org/t/separate-water-nozzle-no-need-to-mount-improved-water-flow/6550)
**Author:** [@ClosedCircuit](https://forum.farmbot.org/u/ClosedCircuit)\ **Replies:** 10\ **Last updated:** [August 7, 2025, 11:09am UTC](https://forum.farmbot.org/t/separate-water-nozzle-no-need-to-mount-improved-water-flow/6550 "2025-08-07T11:09:24Z")
I have posted an alternative water nozzle on Thingiverse: https://www.thingiverse.com/thing:4534979 It has solved two issues and created one additional benefit for me: Rather than droplets, the original watering too… --- ## [Improved UTM seating - Improved connectivity after head change](https://forum.farmbot.org/t/improved-utm-seating-improved-connectivity-after-head-change/9861)
**Author:** [@mvillion](https://forum.farmbot.org/u/mvillion)\ **Replies:** 5\ **Last updated:** [July 13, 2025, 1:48pm UTC](https://forum.farmbot.org/t/improved-utm-seating-improved-connectivity-after-head-change/9861 "2025-07-13T13:48:25Z")
I have always been frustrated that after a head change, the FB would often not detect the new head. Additionally, I had issues with the soil moisture sensor coming off in the ground during the retraction phase of moveme… --- ## [UTM Upgrade Needed – Seeking Collaborators for DIY Project\*\*](https://forum.farmbot.org/t/utm-upgrade-needed-seeking-collaborators-for-diy-project/9817)
**Author:** [@jan.janson](https://forum.farmbot.org/u/jan.janson)\ **Replies:** 4\ **Last updated:** [July 12, 2025, 8:21pm UTC](https://forum.farmbot.org/t/utm-upgrade-needed-seeking-collaborators-for-diy-project/9817 "2025-07-12T20:21:55Z")
Hey everyone! I’ve been using the UTM tool for a while now, and frankly, it’s time for an upgrade. While it has its merits, there are a few issues that I’ve run into that I think can be improved. Just a heads-up, my DIY… --- ## [Speaker port on PI board](https://forum.farmbot.org/t/speaker-port-on-pi-board/9829)
**Author:** [@mvillion](https://forum.farmbot.org/u/mvillion)\ **Replies:** 2\ **Last updated:** [July 6, 2025, 9:46pm UTC](https://forum.farmbot.org/t/speaker-port-on-pi-board/9829 "2025-07-06T21:46:40Z")
I was digging through the documentation and noticed the audio port was highlighted, indicating that the port was important. Is the audio port used in the project and if so, what is required to make it work? If it can b… --- ## [Relocation of water control system](https://forum.farmbot.org/t/relocation-of-water-control-system/9820)
**Author:** [@mvillion](https://forum.farmbot.org/u/mvillion)\ **Replies:** 0\ **Last updated:** [June 16, 2025, 8:10pm UTC](https://forum.farmbot.org/t/relocation-of-water-control-system/9820 "2025-06-16T20:10:17Z")
Hi there When it comes to the redesign of FB for the next iteration, can I recommend that the water control valve is moved OFF the gantry and onto the side of the veg bed at the end of the cable snake. It would make mo… --- ## [Shattered wheel](https://forum.farmbot.org/t/shattered-wheel/9804)
**Author:** [@mvillion](https://forum.farmbot.org/u/mvillion)\ **Replies:** 7\ **Last updated:** [June 10, 2025, 7:15pm UTC](https://forum.farmbot.org/t/shattered-wheel/9804 "2025-06-10T19:15:10Z")
I had FB doing a soak test, but I was watching the log files and noticed a retry movement on the X axis. I thought that is strange so I went to look and found parts of a gantry wheel on the floor. The FB is only one ye… --- ## [Unreliable head detection](https://forum.farmbot.org/t/unreliable-head-detection/9781)
**Author:** [@mvillion](https://forum.farmbot.org/u/mvillion)\ **Replies:** 10\ **Last updated:** [June 3, 2025, 8:42pm UTC](https://forum.farmbot.org/t/unreliable-head-detection/9781 "2025-06-03T20:42:15Z")
Hi everyone. I want to address the unreliable head detection that I and others have. To do so, I need copies of the circuit diagrams around the detection mechanism. I have been thinking about the issue and I expect th… --- ## [Missing seed injector pin in the farm bot box](https://forum.farmbot.org/t/missing-seed-injector-pin-in-the-farm-bot-box/9802)
**Author:** [@JagsKint](https://forum.farmbot.org/u/JagsKint)\ **Replies:** 0\ **Last updated:** [May 30, 2025, 6:34pm UTC](https://forum.farmbot.org/t/missing-seed-injector-pin-in-the-farm-bot-box/9802 "2025-05-30T18:34:50Z")
Hello, We have setup the farmbot and found that there is missing seed injector pin in the toolbox. Could you please help in this. If there is any workaround? --- ## [Active/passive cooling of Raspberry Pi with fan or heatsink](https://forum.farmbot.org/t/active-passive-cooling-of-raspberry-pi-with-fan-or-heatsink/9779)
**Author:** [@stuartturner](https://forum.farmbot.org/u/stuartturner)\ **Replies:** 0\ **Last updated:** [May 17, 2025, 12:33pm UTC](https://forum.farmbot.org/t/active-passive-cooling-of-raspberry-pi-with-fan-or-heatsink/9779 "2025-05-17T12:33:26Z")
I’d like to fit a heatsink or fan to the Raspberry Pi. There seem to be a few options including: Passive heatsinks Fans How effective are they at cooling in the enclosure? Any recommendations for which to … --- ## [Adding 24v pump to Genesis 1.6v](https://forum.farmbot.org/t/adding-24v-pump-to-genesis-1-6v/9772)
**Author:** [@mlynn](https://forum.farmbot.org/u/mlynn)\ **Replies:** 1\ **Last updated:** [May 8, 2025, 4:23am UTC](https://forum.farmbot.org/t/adding-24v-pump-to-genesis-1-6v/9772 "2025-05-08T04:23:27Z")
Hi there we added a 24v pump to directly to the Farmduino as a peripheral 4. We can get the pump to turn on and the solenoid open but the system is shutting down when we run the sequence: turn water on, wait 3000 millis… --- ## [3D Printed End Caps For the Custom Extrusion](https://forum.farmbot.org/t/3d-printed-end-caps-for-the-custom-extrusion/9765)
**Author:** [@slashsaber2005](https://forum.farmbot.org/u/slashsaber2005)\ **Replies:** 1\ **Last updated:** [May 5, 2025, 5:55pm UTC](https://forum.farmbot.org/t/3d-printed-end-caps-for-the-custom-extrusion/9765 "2025-05-05T17:55:47Z")
Hi I was wondering if anyone has made or would be willing to design 3D printed endcaps for the aluminum extrusions. I have found that the extrusions on the farmbot we have in are green house are quite sharp and can easi… --- ## [Rotary tool mechanical grab testing](https://forum.farmbot.org/t/rotary-tool-mechanical-grab-testing/9658)
**Author:** [@farmbotguy](https://forum.farmbot.org/u/farmbotguy)\ **Replies:** 0\ **Last updated:** [February 11, 2025, 8:55am UTC](https://forum.farmbot.org/t/rotary-tool-mechanical-grab-testing/9658 "2025-02-11T08:55:15Z")
Hi guys, I am currently designing and testing a attachment for the rotary tool which turns it into a mechanical grab, and all was going well until the rotary tool decided to stop turning in either direction, can anyone … --- ## [New seeder tool design from Liberty University](https://forum.farmbot.org/t/new-seeder-tool-design-from-liberty-university/7145)
**Author:** [@Marc](https://forum.farmbot.org/u/Marc)\ **Replies:** 14\ **Last updated:** [February 6, 2025, 12:57pm UTC](https://forum.farmbot.org/t/new-seeder-tool-design-from-liberty-university/7145 "2025-02-06T12:57:33Z")
Greetings FarmBot Nation! I am excited to show you the latest prototype seeder tool for the FarmBot designed by Liberty University. The intent of this tool is to allow users to drop pelleted (spherical) seeds directly o… --- ## [Farmduino aux dc output max A](https://forum.farmbot.org/t/farmduino-aux-dc-output-max-a/9613)
**Author:** [@ptakun](https://forum.farmbot.org/u/ptakun)\ **Replies:** 1\ **Last updated:** [January 12, 2025, 11:02pm UTC](https://forum.farmbot.org/t/farmduino-aux-dc-output-max-a/9613 "2025-01-12T23:02:12Z")
Hi, I’m planning to connect additional lamps to the auxiliary ports of my system, but I can’t find information on the maximum current (A) these ports can handle. Could you clarify this? --- ## [V Wheels Rapidly Degrading](https://forum.farmbot.org/t/v-wheels-rapidly-degrading/9383)
**Author:** [@jamesdouglas](https://forum.farmbot.org/u/jamesdouglas)\ **Replies:** 1\ **Last updated:** [December 4, 2024, 12:59am UTC](https://forum.farmbot.org/t/v-wheels-rapidly-degrading/9383 "2024-12-04T00:59:30Z")
The V-Wheels on my Farmbot Genesis v1.6 are degrading rapidly. It seems like every week I’m replacing one or two wheels. They crack and fall apart unexpectedly, and I’m trying to figure out the cause. Here’s what I’ve r… --- ## [Aluminum rail for the Farmbot Express XL](https://forum.farmbot.org/t/aluminum-rail-for-the-farmbot-express-xl/6048)
**Author:** [@Catfarm](https://forum.farmbot.org/u/Catfarm)\ **Replies:** 7\ **Last updated:** [October 6, 2024, 3:01pm UTC](https://forum.farmbot.org/t/aluminum-rail-for-the-farmbot-express-xl/6048 "2024-10-06T15:01:31Z")
Hi there, I would like to share a bit of our experience on the Catfarm with the Farmbot so far :smiley\_cat: We have installed an aluminium rail with the community for the Farmbot XL This we have decided after already … --- ## [Scaling the farmbot](https://forum.farmbot.org/t/scaling-the-farmbot/9300)
**Author:** [@farmingomy](https://forum.farmbot.org/u/farmingomy)\ **Replies:** 2\ **Last updated:** [October 4, 2024, 7:05pm UTC](https://forum.farmbot.org/t/scaling-the-farmbot/9300 "2024-10-04T19:05:13Z")
Can it be designed or customized so that the machine can be moved from one farming bed to another farming bed, without buying the equipment for each bed. In this way it can be scaled to 2 - 5 farming beds depending on ho… --- ## [Polarity of the Countersunk Ring Magnets](https://forum.farmbot.org/t/polarity-of-the-countersunk-ring-magnets/9303)
**Author:** [@farmS1m](https://forum.farmbot.org/u/farmS1m)\ **Replies:** 0\ **Last updated:** [September 28, 2024, 10:41am UTC](https://forum.farmbot.org/t/polarity-of-the-countersunk-ring-magnets/9303 "2024-09-28T10:41:37Z")
Does someone know the polarity of these Countersunk Ring Magnets? Unfortunately I don’t have a reference magnet around to check it by myself. --- ## [FS: Farmbot Genesis v1.3 New in Box](https://forum.farmbot.org/t/fs-farmbot-genesis-v1-3-new-in-box/9285)
**Author:** [@Arielv](https://forum.farmbot.org/u/Arielv)\ **Replies:** 0\ **Last updated:** [September 1, 2024, 2:25am UTC](https://forum.farmbot.org/t/fs-farmbot-genesis-v1-3-new-in-box/9285 "2024-09-01T02:25:18Z")
Farmbot Genesis v1.3 Never taken out of the box. Brand new. Just don’t have time to build it. PM me for more information. Locate in Riverside California. Local Pickup preferred but can also ship. --- ## [CAN bus for the farmbot](https://forum.farmbot.org/t/can-bus-for-the-farmbot/9242)
**Author:** [@jan.janson](https://forum.farmbot.org/u/jan.janson)\ **Replies:** 4\ **Last updated:** [July 31, 2024, 10:42pm UTC](https://forum.farmbot.org/t/can-bus-for-the-farmbot/9242 "2024-07-31T22:42:29Z")
Hi guys, I as DIYer am not fully satisfied with the encoders. Their cables take lot of space in cable chains. The drag chain outdoor cables are really expansive (LAPP, UV resistant drag chain cable). If you need addition… --- ## [Ribbon Cable to HDMI Cable Adapter](https://forum.farmbot.org/t/ribbon-cable-to-hdmi-cable-adapter/1490)
**Author:** [@hanno](https://forum.farmbot.org/u/hanno)\ **Replies:** 3\ **Last updated:** [July 22, 2024, 1:14pm UTC](https://forum.farmbot.org/t/ribbon-cable-to-hdmi-cable-adapter/1490 "2024-07-22T13:14:01Z")
Hey guys! To have a more flexible cable from the Raspberry Pi Camera to the electronic box I'd like to use a Ribbon Cable to HDMI Cable Adapter as described in the docs. But I can't find such a cable and the documentat… --- ## [The UTM tool adds a hardware connection prompt light](https://forum.farmbot.org/t/the-utm-tool-adds-a-hardware-connection-prompt-light/9234)
**Author:** [@JoeHou](https://forum.farmbot.org/u/JoeHou)\ **Replies:** 0\ **Last updated:** [July 17, 2024, 4:47am UTC](https://forum.farmbot.org/t/the-utm-tool-adds-a-hardware-connection-prompt-light/9234 "2024-07-17T04:47:43Z")
I’m not sure if FarmBot now includes a hardware prompt light connection in the UTM tool. The year before last, I DIYed a PCD layout on a mini FarmBot. Maybe this idea can be used as a reference by the FarmBot community. … --- ## [Z and X Axis - Rhythmically clicking when moving](https://forum.farmbot.org/t/z-and-x-axis-rhythmically-clicking-when-moving/9116)
**Author:** [@mvillion](https://forum.farmbot.org/u/mvillion)\ **Replies:** 23\ **Last updated:** [June 30, 2024, 9:29pm UTC](https://forum.farmbot.org/t/z-and-x-axis-rhythmically-clicking-when-moving/9116 "2024-06-30T21:29:49Z")
I am having issues with my Z - axis and it has made me look at the whole thing. When my Z-Axis is moving up or down, it makes a strong click sound roughly every 2 seconds. Without power, it is super smooth and has no r… --- ## [Wrong z encoder cable](https://forum.farmbot.org/t/wrong-z-encoder-cable/9212)
**Author:** [@andisergiu](https://forum.farmbot.org/u/andisergiu)\ **Replies:** 0\ **Last updated:** [June 19, 2024, 12:22pm UTC](https://forum.farmbot.org/t/wrong-z-encoder-cable/9212 "2024-06-19T12:22:29Z")
Hello! Our cable carrier for one of the XL (1.7) versions has a wrong cable. The y carrier has 2 cables for the z motor instead of 1 cable for the z motor and one for the z encoder. I need this cable asap. On the shop h… --- ## [UTM fitting design change](https://forum.farmbot.org/t/utm-fitting-design-change/9208)
**Author:** [@mvillion](https://forum.farmbot.org/u/mvillion)\ **Replies:** 0\ **Last updated:** [June 18, 2024, 8:10pm UTC](https://forum.farmbot.org/t/utm-fitting-design-change/9208 "2024-06-18T20:10:44Z")
I would like to see a redesigned UTM head. I would like to see some thing changed with the design somehow. I have been trying out the soil sensor and get a consistent read of 230-240 regardless of what it touches. Rea… --- ## [Can I get the exploded cad of the Genesis for some reason I can't get the exploded in the onshape. It will helps me a lot for my project](https://forum.farmbot.org/t/can-i-get-the-exploded-cad-of-the-genesis-for-some-reason-i-cant-get-the-exploded-in-the-onshape-it-will-helps-me-a-lot-for-my-project/9198)
**Author:** [@larn12](https://forum.farmbot.org/u/larn12)\ **Replies:** 0\ **Last updated:** [June 15, 2024, 6:01pm UTC](https://forum.farmbot.org/t/can-i-get-the-exploded-cad-of-the-genesis-for-some-reason-i-cant-get-the-exploded-in-the-onshape-it-will-helps-me-a-lot-for-my-project/9198 "2024-06-15T18:01:58Z")
Exploded cad of this pls [Next page](https://forum.farmbot.org/c/hardware/5.md?page=1)