Troubleshooting


Problems with X-Axis belts (5)
Configuration Errors? Cannot re-configure (2)
Farmbot via Ethernet drops every 20 minutes like clockwork (17)
Trouble connecting to network (1)
Farmbot offline, logs show cyclical pattern ( 2 3 ) (48)
Unable to download file from OnShape (7)
Farmbot version 6.4.11 cannot start due to "Certificate expired" (9)
Y-axis enconder don't work (2)
X-axis encoder acting up (3)
FarmBot UI not updating logs - "Device is sending too many logs (more than 500 logs in 1 minute)" (7)
My.farm.bot password reset fails (11)
USB camera not detected (3)
Farmbot disconnects from network, repeated firmware initialization (4)
Farmbot disconnected after latest OTA OS update (12)
E-Stop when reading a pin value (3)
Farmbot disconnected, repeated error messages (5)
Vacuum Pump Blows (14)
Cannot control motors or peripherals (1)
Power supply blinking green light (2)
Z axis motor running (2)
CS Failed: [move_absolute] - :firmware_error (1)
Sync Error has broken farmbot (5)
Sets Current position as 0,0,0 after every boot (2)
FB locking itself on movement error even if not set so (3)
Issue with camera rotation and photos view on farm designer (5)
Gantry “stutters”. Does it need more torque? (18)
Farmware install issues (6)
Gantry Uneven and crooked (2)
FarmBot OS not starting (8)
On Farmbot restart, web app shows wrong firmware version (3)