Troubleshooting


Topic Replies Activity
I think I just debugged an encoder/motor problem 2 April 24, 2019
Seeding - Thoughts and ideas 9 April 23, 2019
Fb gen 1.4 Encoder not working 5 April 23, 2019
Problems with X-Axis belts 5 April 20, 2019
Configuration Errors? Cannot re-configure 2 April 19, 2019
Farmbot via Ethernet drops every 20 minutes like clockwork 17 April 18, 2019
Trouble connecting to network 1 April 18, 2019
Farmbot offline, logs show cyclical pattern 48 April 18, 2019
Unable to download file from OnShape 7 April 18, 2019
Y-axis enconder don't work 2 April 16, 2019
X-axis encoder acting up 3 April 16, 2019
FarmBot UI not updating logs - "Device is sending too many logs (more than 500 logs in 1 minute)" 7 April 16, 2019
My.farm.bot password reset fails 11 April 15, 2019
Farmbot disconnects from network, repeated firmware initialization 4 April 11, 2019
Farmbot disconnected after latest OTA OS update 12 April 10, 2019
E-Stop when reading a pin value 3 April 10, 2019
Farmbot disconnected, repeated error messages 5 April 10, 2019
Cannot control motors or peripherals 1 April 9, 2019
Power supply blinking green light 2 March 31, 2019
Z axis motor running 2 March 29, 2019
CS Failed: [move_absolute] - :firmware_error 1 March 29, 2019
Sets Current position as 0,0,0 after every boot 2 March 27, 2019
FB locking itself on movement error even if not set so 3 March 25, 2019
Issue with camera rotation and photos view on farm designer 5 March 25, 2019
Gantry “stutters”. Does it need more torque? 18 March 25, 2019
Farmware install issues 6 March 22, 2019
Gantry Uneven and crooked 2 March 21, 2019
FarmBot OS not starting 8 March 19, 2019
On Farmbot restart, web app shows wrong firmware version 3 March 19, 2019
Farm events constantly missed 16 March 17, 2019