# Clone Mega2560 Board

**URL:** <https://forum.farmbot.org/t/clone-mega2560-board/979>\
**Category:** Arduino\
**Created:** [November 25, 2016, 5:53pm UTC](https://forum.farmbot.org/t/clone-mega2560-board/979 "2016-11-25T17:53:24Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![fansa336](https://forum.farmbot.org/letter_avatar_proxy/v4/letter/f/df788c/32.png) [@fansa336](https://forum.farmbot.org/u/fansa336)\
**Post date:** [November 25, 2016, 5:53pm UTC](https://forum.farmbot.org/t/clone-mega2560-board/979/1 "2016-11-25T17:53:24Z")

</div>

Hello makers,

i had recently buy a clone Mega2560 Board.This board use CH341 as USB-Serial controller and, when i plug-in it on my raspberry, i can’t do something, like set to high the pinout 13 for exemple.

can you help me to know how i can force the raspberry to accept the arduino ?

thank you for your listenning.

Bye 😉

---

<div class="post-metadata">

**Author:** ![david\_hickox](https://forum.farmbot.org/letter_avatar_proxy/v4/letter/d/c57346/32.png) [@david\_hickox](https://forum.farmbot.org/u/david_hickox)\
**Post date:** [November 25, 2016, 6:44pm UTC](https://forum.farmbot.org/t/clone-mega2560-board/979/2 "2016-11-25T18:44:24Z")

</div>

Before trying to force the pi to use it, I would recommend plugging it into your desktop or laptop and writing a piece of code to flash one of the LEDs on it and see if that works because if it doesn’t it may be a dead board. I suspect this because I have never had any problems with the pi working with any clones of the Arduino.

---

<div class="post-metadata">

**Author:** ![fansa336](https://forum.farmbot.org/letter_avatar_proxy/v4/letter/f/df788c/32.png) [@fansa336](https://forum.farmbot.org/u/fansa336)\
**Post date:** [November 26, 2016, 6:29pm UTC](https://forum.farmbot.org/t/clone-mega2560-board/979/3 "2016-11-26T18:29:31Z")

</div>

Hello David, thank you for your answer,  
I was already do this, plug the arduino on the PC, but he don’t work with the official arduino driver, only the CH341 driver.  
Did i need to plug the arduino at the moment where the raspberry boot for the first time ?

Goodnight.
