At least once every year or two I get winds in excess of 90 km/hr (55 miles/hr) in my area.
How well does the FarmBot handle high winds?
Same here, I live in the San Juan Islands on the coast where gales come right up the straights. I worried about farmbot this winter but it weathered it like a champ. I just make sure all the motors are ‘always on’, and I park the z axis as far down as possible so that bits are hanging out in the wind, and it is fine. Make sure the screws are tight at the end.
I get enough wind here that I’m mulling over having a wind gauge attached to an arduino pin, so that before executing a sequence it makes sure that the wind speed (analog voltage from the gauge) is not too high.