# Rotary tool mechanical grab testing

**URL:** <https://forum.farmbot.org/t/rotary-tool-mechanical-grab-testing/9658>\
**Category:** Hardware\
**Created:** [February 11, 2025, 8:55am UTC](https://forum.farmbot.org/t/rotary-tool-mechanical-grab-testing/9658 "2025-02-11T08:55:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![farmbotguy](https://forum.farmbot.org/letter_avatar_proxy/v4/letter/f/e495f1/32.png) [@farmbotguy](https://forum.farmbot.org/u/farmbotguy)\
**Post date:** [February 11, 2025, 8:55am UTC](https://forum.farmbot.org/t/rotary-tool-mechanical-grab-testing/9658/1 "2025-02-11T08:55:15Z")

</div>

Hi guys,

I am currently designing and testing a attachment for the rotary tool which turns it into a mechanical grab, and all was going well until the rotary tool decided to stop turning in either direction, can anyone give me some advise on what this may be and how to fix. I have tried all of the suggested actions that the app said;

- “Check the UTM to tool electrical connections. Ensure pin jumpers are installed across the Farmduino UTM pins. Brush the top of the tool electrical connection screws and UTM pogo pins with a cloth to clean the surface and ensure good electrical conductivity. If a connection still cannot be made, try loosening and tightening the tool electrical connection M3 screws.\*”

 ![20250211_083550 grab](https://forum.farmbot.org/uploads/default/original/2X/4/48020a01251d71fe56162d9601d2103e0746ce72.jpeg)

---

<div class="post-metadata">

**Author:** ![system](https://forum.farmbot.org/user_avatar/forum.farmbot.org/system/32/4564_2.png) [@system](https://forum.farmbot.org/u/system)\
**Post date:** [March 13, 2025, 8:55am UTC](https://forum.farmbot.org/t/rotary-tool-mechanical-grab-testing/9658/2 "2025-03-13T08:55:23Z")

</div>

Closed on March 13, 2025, 8:55am UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
