Haha. yeah sorry i should of stated that earlier 
So ascend, Can you lead me through this process of calibration and homing?
Ive got to be doing something wrong or have a setting off.
this is what i do and what happens when i calibrate.
Ill move the X axis to the very end of the track - opposite from where i would manually set the X 0 position.
Ill click “Calibrate X” and the FB happily moves along the X axis to the end of the track - it gets there and then continues to pulse the motors until i E-stop it.
I’ve messed around by lowering the MAX RETRIES to 1, i have also changed the MAX MISSED STEPS down to 1, 2, 5 and 10 but the FB doesn’t seem to respond to the fact that its hitting the end of the track.
Same thing goes for Homing.
i have also lowered timeout after settings down to 15, 20, 30.
Also to note, when i have encoders enabled ad use encoders for positioning and give the FB a command like move 100mm, it will move along the track at the same speed as when you click the homing button, it wont stop at 100mm like the command is given AND i cannot issue it any more command unless i E-stop and if i look at the Control Tab where "SCALED ENCODER (STEPS) & RAW ENCODER DATA is at. i see nothing but zeros. 
I’m going to try and get some video for a more visual explanation and reference to my issue but, got anything on this?