Farmbot : supplying water from Water Tank

[jrwaters]

Its interesting that the pump mentioned in mods&addons wasn’t sufficient. I used it and just posted about my project if you are interested:

Converted watering to use a wine barrel

I started with the directions at Capture and Use Rainwater | FarmBot Genesis Documentation Instead of a plastic rain barrel, I refurbished a wine barrel. Also, instead of putting a spigot at the bottom (would have been nice for pressure), I wanted to use a food-grade insert and hence didn’t want to have a hole cut at the bottom. So, I pump the water up the wine barrel and out of the top. For the pump, I 3d printed a container so I could feed the wires in through sealed tubes. I encased it a…

Interesting to me that you ended up with a pump that was not submerged. I didn’t even consider that Would have saved me a lot of time with epoxy. I need to look closer at this. Thank you for sharing.