Hi,
I also received mis-matched seeder, brass insert, luer adapter. I “ordered” the free one via the shopping cart.
Since this is an open source project, I figured I can also just source the part myself (since there may be some shipping delays). I have M5 brass insert here. I 3d printed the seeder part downloaded from the web CAD. But the hole in the seeder to too small for a M5 brass insert. Since version Genesis XL 1.5 uses the M5 insert, the CAD part should be sized for it. I’m not sure what is up there. I’ll probably just drill out the hole bigger.
I also tried tracking down a source for the luer lock adapter. The only similar part I found was over $30, which seems a bit high for a simple part. The Bill of Materials (BOM) isn’t very specific about the part. It would be great if the BOM could include a manufacturer’s part number so equivalents could be found.