Using Custom Arduino Firmware


#1

I just updated my Rpi to the latest software, then it got stuck at the updating Arduino firmware stage (I don’t have an Arduino). Have you locked the Rpi software to the Arduino? Do I just need to supply the correct response to the F83 request to pretend my interface is an Arduino in order to avoid the firmware update?
Thanks,
Jon


Sequences, Pin Information, Status
V4.0.0 Software Update
#2

During configuration there is actually a paramater for this.

When you are configuring your bot you will need to click the banner that says Configure Your FarmBot 10 times.
This will bring up the Advanced settings menu.

then thick the box labeled “custom arduino firmware” this disables all firmware checks.